W2016002 W-1 Oversized Router Bit, special 6mm shank

Product Description

These oversized bits produce a slightly larger keyway slot compared to our standard dovetail bits and are used only in special applications, for example on very thin material standing on edge (shadow box picture frames, etc.) The larger slot lowers the lateral (sideways) pressure of the Dovetail Keys, reducing the chance to split the thin material when the Key is inserted. These bits should only be used in application where standard bits do not produce the desired results; using these bits with average sized material can result in reduced joint strength.

Solid carbide Hoffmann dovetail router bit, size W-1 with 6mm shank, for all Hoffmann dovetail routing machines except Hoffmann MS-series Double Miter Saws.
Made from high-quality, industrial tungsten carbide for clean cuts and long tool life.
The bits are made in Germany to exacting specifications and subject to rigorous inspections during manufacturing. We guarantee our bits to produce perfectly sized dovetail slots for the corresponding Dovetail Keys.

Average tooling life for these bits is approx.10,000 cuts and often much more (varies depending on type of material, length of dovetail slot and router feed rate).
These bits have 6mm shanks and fit all Hoffmann dovetail routing machine models except our MS-series Double Miter Saws - please see part number W2016002 for the same bits with 6.00mm shanks for Hoffmann MS35SF Double Miter Saws.

Chip Breakers:
A square chip breaker (part# W2000015) is included with each of these bits at no charge. If you own a MUC or X-15 machine model, please request a parallelogram shaped chip breaker (part# W1000032) instead.

 Square Chip Breaker  W2000015          Chip Breaker for X-15 models   W1000032

 Tips for adjusting dovetail router bits for best results:
Hoffmann routing machines are delivered with specially designed square stops which double as set-up gauges. (X-15 models are shipped with separate gauge blocks).

 Square Stop for MU-2 series W3900004                       Square Stop shown on MU-3D machine  W3020001

The square-stops have steps for W-1, W-2, W-3 and W-4 router bits and will create a bit setting which is perfect for the majority of joining applications.

 Digital Multi Gauge:
Instead of using the steps in the square-stop, the Digital Multi Gauge can be used to set precise router bit projections on the machines. The digital read-out allows precise setting of router bits which is especially helpful in cases were a little less or more draw (or clamping force) is required. For example, when joining small applied frames or mullions the draw can be reduced and on large, heavy moulding the draw can be increased to suit individual needs.

\

 The gauge features a large, easy-to-read display which can be switched from millimeter to inches. Aside from setting router bits on Hoffmann machines, the gauge is used in woodworking shops to set sawblades on table saws, bits in router tables, to measure dado and groove depths, etc.

Technical Specifications: