Same as our standard MORSØ-E Future Green but with special electrics for 220 volt - single phase power supply.
MORSØ-E Future Green is a fully automatic, electric miter machine with a dual hand release. This makes the machine absolutely safe to operate as it is impossible to start the machine and touch the knives at the same time.
With MORSØ-E Future Green you achieve a clean, smooth cut as the workpiece is automatically cut twice as long as both push buttons are activated at the same time . The cutting time varies from 1 second and up, depending on the thickness of the workpiece. Having finished the cutting, the knife block automatically returns to the starting position.
The starting position is horizontally adjustable up to 60 mm (2.4’’). Maximum width of the workpiece is 100 mm (4’’). From a 60 mm (2.4’’) width, the MORSØ-E Future Green will automatically cut the workpiece bit by bit. The variable starting position is adjusted by a handle.
The vertical movement of the knives is also adjustable with three different heights. One for small workpieces, a second for medium-sized workpieces and a third for very thick workpieces (up to 180 mm / 7’’).
Technical Specifications:Electrical connection 230 volt, single phase, 15 Amp, 1.1Kw - equipped with frequency inverterDouble miter 45°
Single Miter up to 90°
Cutting width max. 100 mm (4”)
Cutting height max 180 mm (7”)
Measuring scale 1,500 mm (60”)
Motor three phase 0,55 kW
Net weight 135 kilos (298 lbs) MORSØ-E Future Green is delivered with:
• dual hand release
• safety guard
• sliding longitudinal stop
• a second stop
• measuring scale up to 1.500 mm (60’’)
• waste chute
• extension table on the left side
• adjustable fences
• adjustable and automatic rebate support
• adjustable hydraulic clamping cylinders