Product DescriptionHoffmann Automated Cornice Saw model ACS-1This machine is custom manufactured for the precise length cutting of cornice material made of wood and plastic. A precision HOFFMANN saw station with a 420mm saw blade capacity is mounted on linear THK tracks on a welded steel frame. A dust-proof electrical enclosure is mounted on the right side of the base frame.The saw station features an oil-pneumatic feed system with precise controls for downward and return stroke speeds.Cutting angles are pneumatically adjusted in three positions: -45° --- 90° --- +45°Horizontal and vertical pneumatic clamps are used to secure material during the cutting cycle. Individual shut-off valves allow operator to adjust clamp location and pressure to match moulding being processed.
Left hand infeed table is sized to support up to 10 foot long raw material – longer or shorter lengths are available.
Right hand table features Automatic Length Positioning System HOFFMANN ELA-2 with 3000mm working length. A moveable console with color touch-screen allows operator to enter desired material length in millimeters or inches.Operator console with two-hand safety control buttons and pneumatic selector switch to set cutting angleFoot pedal operated pneumatic material clamps on left and right hand side
- Operator places raw material on left hand infeed table
- Operator enters cutting length on touch screen, positioner adjusts to entered length
- Operator selects either 45 degree left, 90 degree straight or 45 degree right cut for saw head with selector switch
- Operator slides material in place, presses foot switch to activate clamps, then presses two-hand buttons to cut material to size
- Finished part is removed manually and raw stock is moved manually from left to right for next piece.
Hoffmann ACS-1 Technical Specifications: Power 230 volts, 3 P, 15 Amps Air Supply 90 psi Saw head 2.2KW - 3,000 rpm Saw blade 420mm diameter, 30mm bore Cutting capacity 8” (205mm) material width by 2” (50mm) material thickness Cutting angle pneumatically adjustable -45° --- 90°--- +45° Minimum material length 1.0" Maximum material length 118” Operation Two-Hand safety controls Controls Electronic operation with industrial quality PLC Individual electronic brake for saw motor Dust collection 2 x ports, 4” diameter, min. 750 cfm each Dimensions to be determined, length of machine depends on desired infeed table length (Technical specs. are subject to change)