Hoffmann PU2-TF Dovetail Routing Machine
Part No: W1072000
Availability: Out Of Stock
Production-duty, freestanding dovetail routing machine with solid cast aluminum table and large work surface at comfortable working height. Equipped with two direct-drive router motors. Router bit spacing is factory set to customer's specifications (between 2 9/16" - 4" = 65mm - 100mm)
The keyway location is adjusted by positioning the guided center fence plate on the machine table.
Pressing the pneumatic foot pedal activates the machining cycle:
- two pneumatic clamps secure workpiece on machine table & motors are switched on
- router heads advance until the pre-set height position is reached
- router heads return to home position & motors are switched off
- pneumatic clamps release workpiece
Output is approx. 16 routing strokes per minute, which translates into 2 completely processed rectangular frames. These numbers include material handling, but obviously depend on routing depth, feed speed, material flow and operator performance as well. Flow control valves on the main pneumatic cylinder allow the operator to adjust the upward and downward feed rate independently, depending on the material being processed.
A heavy-duty aluminum table provides a large work surface. The steel cabinet has a 4” diameter dust collection port on its backside for dust free operation.
The supplied router bits are solid tungsten carbide, made to exacting specifications. Depending on the routing depth and the material to be routed, the useable cutter life is approx. 10,000 strokes. Every machine is shipped with a tool kit and set-up jig, which allows a router bit change in only minutes. Diamond cutters are also available.
Standard Features: Hoffmann Dovetail Routing Machine, model PU2-TF, ready for operation, with two W-2 carbide router bits, standard 45 degree fence plate and square stop, air regulator, air filter, and oil lubricator assembly installed. Also includes toolkit and manual.
Warranty: One year on parts and workmanship. Complete Hoffmann Warranty Terms apply.
Freight Cost Information: Machines are shipped in sturdy plywood boxes and shipping charges vary greatly due to different shipping weights, transit times and destination ZIP codes.
If you would like to get a freight quote or place an order for this machine, please contact our office toll-free at (866)248-0100.
|Power Supply||120 Volts- 17 Amps.|
|Motor||2 x 1,000 Watt|
|Motor Speed||27,000 RPM|
|Air Supply||90 PSI|
|Max. Routing Height||4"|
|Max. Material Height||5 3/4"|
|Installed Router Bit||2 x W-2 Solid Carbide|
|Router Bit Spacing||2 9/16" Minimum (preset at factory)|
|Available Router Bits||W-1, W-2, W-3|
|Dimensions||32 1/4" x 29 1/2" x 59"|