Hoffmann PP2-H Dovetail Routing Machine
Part No: W1086000
Availability: Out Of Stock
The Hoffmann PP2-H Dovetail Routing Machine is designed for horizontal routing operations. This heavy-duty machine is used in a variety of applications, from small moulding assembly to large timber processing for sunroom construction, post and beam designs, etc. The extra-heavy motors can rout keyways for W-4 Keys in a production environment without strain. The machine is equipped with two heavy-duty router motors that have a carbide router bit in each motor. The motors are mounted on special carriages with linear bearings. These bearings ride on precision ground steel guides assuring perfect alignment and trouble free operation. The supplied 45 degree fence plate, which is guided in a key way in the machine table, is used to accurately position the material on the table. For butt and panel-to-panel joints, two square stops and a recessed tape scale are used.
After placing the workpiece on the machine the following routing process is started by pressing the pneumatic foot pedal:
- pneumatic clamps secure material on table
- router motors are started
- depending on selected mode, the router motors either advance toward the middle of the machine until pre-set position is reached or the motors start form the center of the machine and move outwards
- router heads return to home position and are switched off
- clamps release the processed workpiece
The horizontal routing strokes can be adjusted from 0 - 9 1/2", larger strokes are available as option. The distance between the router bits and the machine table can be adjusted by the operator from 0 - 7". The maximum workpiece thickness is 9 1/2".
The supplied router bits are solid tungsten carbide, made to exacting specifications. Depending on the routing depth and the material to be routed, the useable cutter life is approx. 10,000 strokes. Every machine is shipped with a tool kit and set-up jig, which allows a router bit change in only minutes. Diamond cutters are also available
The automatic machine cycle is started using the foot pedal. The workpieces are clamped, the router units travel to their pre-set depth (horizontal or vertical) and then return to their home position. The clamps release the workpiece. The motors start and stop automatically; the choice of horizontal or vertical operations is selected by a switch. The position of the fences and routing depth are adjusted manually.
Standard Features: Hoffmann Dovetail Routing Machine, model PP2-H, ready for operation with one W-2 carbide router bit, standard 45 degree fence plate and square stop, air filter, ail regulator, and oil lubricator installed. Also includes toolkit and manual.
Warranty: One year n parts and workmanship. Complete Hoffmann Warranty Terms apply.
Freight Cost Information: Machines are shipped in sturdy plywood boxes and shipping charges vary greatly due to different shipping weights, transit times and destination ZIP codes.
If you would like to get a freight quote or to place an order for this machine, please contact our office toll-free at (866)248-0100.
|Power Supply||230 Volt, 3 Phase, 15.5 Amp|
|Motor||2 x 1,700 Watt HD|
|Motor Speed||25,000 RPM|
|Air Supply||90 PSI|
|Max. Material Height||9 1/2"|
|Installed Router Bit||W-2 Solid Carbide|
|Available Router Bits||W-1, W-2, W-3, W-4|
|Dimensions||39 3/8" x 29 1/2" x 59"|
|The Hoffmann PP2-H Dovetail Routing Machine is designed for horizontal routing operations. This heavy-duty machine is used in a variety of applications, from small moulding assembly to large timber processing for sunroom construction, post and beam designs, etc. The extra-heavy motors can rout keyways for W-4 Keys in a production environment...|