Hoffmann X-20 Bench-Top Routing Machine
Part No: W1000200
Availability: In Stock
The Hoffmann X-20 bench-top routing machine is designed for custom picture framing and woodworking operations.
The machine is used for a wide range of joining operations, including miter joints with different angles, end-to-end and T-joints, etc.
Compared to the smaller and lighter X-15 model, the machine has a larger table (and therefore more material support) and it is capable of processing larger material.
The maximum material thickness is 4” and the maximum routing stroke is 3”.
Please note: Special $129.00 flat rate shipping (truck delivery) charge is applied for destinations in the contiguous U.S. Extra charges may apply for lift-gate service, pre-delivery notification, residential and delivery to Alaska, Hawaii and to international destinations - please contact us for details
The Hoffmann X-20 bench-top routing machine is equipped with a high speed router motor, located at the center of the machine. The routing operation is started by pulling the main lever. A hold down plate is lowered onto the workpiece, pressing it on the table and holding it in place. Further pulling lifts the motor carriage up until the preset cutting height is reached.
The motor is switched on automatically by pulling the lever, it is switched off again when the lever is returned to the home position. Two springs in the lever mechanism counteract the pull down force, which ensures controlled movements throughout the routing process.
Output is approx. 16 routing strokes per minute, which translates into 2 completely processed rectangular frames. These numbers include material handling, but obviously depend on routing depth, feed speed, material flow and operator performance as well.
The supplied router bit is solid tungsten carbide, made to exacting specifications. Depending on the routing depth and the material to be routed, the useable cutter life is approx. 10,000 strokes. Every machine is shipped with a tool kit and set-up jig, which allows a router bit change in only minutes. Diamond cutters are also available.
|Power Supply||120 Volts- 4.4 Amps.|
|Motor||530 Watt Router Motor|
|Motor Speed||29,000 RPM|
|Max. Routing Height||3"|
|Max. Material Height||4"|
|Installed Router Bit||W-2, Solid Carbide|
|Available Router Bits||W-1, W-2, W-3|
|Dimensions||23 5/8" x 21 1/4" x 30 1/4"|
|The Hoffmann X-20 bench-top routing machine is designed for custom picture framers as well as for smaller customer woodworking operations. Compared to the fixed angle X-10 model, the machine can be used for a wide range of joining operations, including miter joints with different angles, end-to-end and T-joints, etc. Compared to the smaller...|
|This video shows how to change the router bit on a Hoffmann X-20 dovetail routing|