MORSO NM Manual Notching Machine (4 1/2" wide material max.)

MORSO NM Manual Notching Machine (4 1/2" wide material max.)
Brand: MORSO - Dan-List S/A
Part No: N0076
Availability: In Stock
Price: $5,120.00
Call 866-248-0100 for Shipping Quote
Qty:    
Download Spec Sheet

The NM is manually operated, standard-duty notching machine for the porduction of beaded face-frames, French-mitered cabinet doors as well as muntin and mullion joints.  The manual model accepts material up to 4 1/" wide, allowing the operator to process a wide range of face frame moulding sizes.

Operation of the machine, cutting head and length stop design are based on the larger NFL and NFXL models, the main differences are a reduced overall footprint and smaller cutting head and knives.  The machine features a steel frame with cast iron tabletop.  The vertical travel of the cutting head can be adjusted depending on workpiece thickness, assuring comfortable operation.

To increase the range of applications, we offer matched smaller cutting heads with each machine. These heads are fitted at the MORSO factory and can be replaced in only minutes. The side knives fit on both heads; only the nose knives differ in design.

We highly recommend the purchase of the smaller cutting head when purchasing the machine. It is used to produce cope and half-lap joints in window grills, cabinet door mullions, etc. The smaller NM head actually costs less than a second pair of side knives!


Standard Features:

MORSO NM foot operated guillotine for beaded face-frames include:

  • safety guard
  • two flip-stops
  • one center flip-stop
  • left and right hand side steel table extensions
  • left and right hand side aluminum fence rails
  • one set of original MORSO side knives for NM, factory ground and honed
  • one 3/4" wide nose knife for NM, factory ground and honed
  • detailed instructions incl. parts diagrams, toolkit

Warranty

Mechanical parts are warranted for twelve months.
Complete MORSO warranty terms apply.

Freight Cost Information:

All MORSO NM manual notching machines are shipped in a plywood crate which is attached to a pallet.  This requires the use of a common carrier trucking company but greatly reduces the risk of transport damage to the machine.

If you would like to get a freight quote or place an order for this machine, please contact our office toll-free at (866)248-0100.

Technical
Max. Moulding Width/Thickness 4" (100mm) / 3" (75mm)
Nose Knife Capacity 1/2" - 1" width (1/4", 5/16", 3/8" with optional smaller NM cutting head)
Extension Tables sheet metal construction, black finished surface, 18 3/4" long, one left and one right hand side
Fence Rails silver anodized aluminum, 59 1/2" total length, one left and one right hand side
Flip Stops aluminum, with locking lever, one per side plus one center stop
Table Height 33" - floor to table surface
Width Including Fence Rails 63"
Weight 110 lbs.
Machinery
// options // end options